iREWORK is using the new heat conduction technology, this is the leading transfer heat method which guaranty to the customer The best quality alongside the utmost safety. iREWORK is the best professional toolkit for your electronic hardware repair needs. It offers many indispensable functions and makes working in a professional repair shop much more easy. Product Description:

• All functions are finely controlled using our custom made software control system with real time data display
• General settings and operating ambient temperature ranges can be programmed using our software in order to work with or without computer
• Has 4 integrated temperature sensors (internal temperature, heater temperature, external temperature and real time temperature tester K Type sensor)
• The heating system has automatic temperature control that can keeping temperature constant and accurate while you work
• An integrated 0.96" OLED that can display all necessary data including state, temperature and voltages
• A built in temperature tester function that can accurately and efficiently measure solder iron and hot air temperature (Measurement range: -125 - 1200 ℃, Tolerance: ± 1 ℃) in real time . This way you can be sure your rework tools are correctly calibrated and working at peak performance
• Heating plate made from high purity copper with an efficient method for high heat flux design
• Wide plate made from aluminum can separating glass etc(Compatible size for 13 inch and below)
• With Wide plate can use for baking、drying、aging etc (Eg.water-flooded components of UMT mainboard)
• Almost all current PCB integrated circuits can be soldered and de-soldered without the need of a soldering iron or a hot air gun. (Eg,Apple A7 A8 A9 A10 CPU 、baseband IC or harddisk IC etc)
• Can act as a pre-heater for your everyday needs to minimize the risk of component damage
• Smart phones, iPad products's glass lens, touch screens & LCD displays can be separated in a few mins
• Default factory settings with general working conditions specification (Eg. Glue remove、IC de-soldering & Soldering、lens & touch screen assembly settings etc)
• Integrated self-resetting overheat protection
• Warning alerts and sound alerts
• Voltage overload protection integrated
• Short circuit detection integrated
• Automatic shutdown function integrated
• All functions are user customizable
• Lifetime free software upgrades and more

Technical Data:

• Operating voltage: 230VAC/50-60Hz
• Output Power: 300 Watts
• Temperature Range:Room temperature - 350 ℃
• Temperature Tolerance: ± 3 ℃
• iREWORK Box Size: 230*90*45 MM
• Package Size: 350*280*100 MM
• Gross Weight: 3.7Kg

The connections: Package content:

• 1 x iREWORK BOX
• 1 x Universal PCB holder(PCB fixture)
  • 4 x M2*6 Screws
• 1 x Wide plate
• 1 x Silicone Protective pad
• 1 x ESP cable
• 1 x Repair tools kit
  • 1 x Mini suction cup
  • 1 x E-knife 8 in 1 set
  • 2 x Plastic Prying Tools
  • 3 x Anti-static Spudger Tools
  • 3 x Dual head Metal Carbon steel
  • 4 x Plastic guitar picks
• 1 x Protective sleeve (Red Color)
• 1 x Scaper (Yellow Color)
• 1 x Cleaning Brush
• 1 x Power Cable
• 1 x Ground cable
• 1 x AB USB Cable

User Manual:

• Read Here

Safety and Technical notes:

• An electric accurately heater is a much safer source than an iron or air gun. However, the heaters also get hot and must be handled with care.

3-in-1 OTG Charging USB Cable for MFC Dongle

This 3-in-1 OTG Charging USB Cable is an additional cable for MFC Dongle, which is used to brute-force password combinations on Apple, HTC and Samsung mobile devices.

3-in-1 OTG Charging USB Cable for MFC Dongle :

• Lightning USB Connector (Yes)
• 30 Pins USB Connector (Yes)
• Micro USB Connector (No)

Package Content:

• 3-in-1 OTG Charging USB Cable - 1 pc.

iPower Adapter for MFC Dongle

iPower Adaptor is an additional kit for MFC Dongle, which is used to brute force Apple iPhone’s (with iOS v.8.x.x) 4-digit pass code. Note: For iPower Adaptor to work, it is a requirement to have 3-in-1 OTG Charging USB Cable and MFC Dongle. So when you purchase an iPower Adaptor, make sure you have other two devices stated above.

iPower Adaptor – Package Content: *

• iPower Adaptor - 1 pc.
• Sensor cable - 1 pc.
• Micro USB Cable (used for connection to Micro USB charge port) - 1 pc.
• Red Boot Cable – 1 pc.

* Due to the onrush of technology and efforts to meet every customer's demands, the supplier retains the right to change some positions in the list of cables and accessories coming together with the product. Therefore, the package content presented above is rather tentative. More details on the matter can be obtained from our sales managers.

iBUS 1 Data Cable can restore and upgrade software for iWatch S0 and S1 (38mm and 42mm).

Features

• Full Support iWatch S1 38mm & 42mm
  • iWatch Series 0 (1st Generation) 38 mm (A1553 N27aAP), 42 mm (A1554 N28aAP)
  • iWatch Series 1 38 mm (A1802 N27dAP), 42 mm (A1803 N28dAP)
• Support iWatch S1 restore and repair software
• Support Downgrade and upgrade firmware
• Support iWatch Glass Digitizer touch programming, etc
• Support demo unit convert to normally unit.
• Work with Mac OS iTunes / Windows iTunes Version from 12.7.
• Work with MFC Dongle software using Windows (Not Free)

Additional Information

• This iBUS cable does not have any software or iWatch firmware with it. You need to download and install the latest version of iTunes on your MAC PC. If you are using Windows PC then you need to use MFC Dongle, in order to use this cable.
• Unfortunately at this moment there is no way to restore OTA files (over-the-air) for the iWatch. Saying that, you should be 100% sure that you have compatible firmware to restore or update your iWatch, using iBUS cable. If you are unsure, please do not purchase this product.

iWatch S0/S1 Firmware:

• For Mac OS / Windows iTunes.
  • Cannot be downloaded from mfcbox.com, if you buy iBUS watch you need to find the original firmware by yourself.

• For MFC Dongle by Windows
  • Can be downloaded from mfcbox.com. Use firmware required for MFC Dongle, which is not compatible with iTunes.

How to put iWatch in DFU and Recovery mode?

• How to put iWatch in DFU mode?
  • Press and hold both Digital Crown and Side Button (Power Button), waiting screen will shutdown, then hold for 3 more seconds and release Side Button (Power Button).
  • Keep holding Digital Crown for 10 more seconds.

• How to put iWatch in Recovery mode?
  • Press and hold both the Digital Crown and the Side Button (Power Button), waiting screen will shutdown, then hold for 3 more seconds.
  • Release Side Button (Power Button) and Digital Crown, then immediately hold Digital Crown and wait for 10 more seconds.

Package content:

• iBUS 1 Data Cable – 1 pc.
• Two in one adapter pilot pin – 1 pc.